Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4

    Threaded View

    1. #1
      Join Date
      Jul 2005
      Location
      Cumberland, Maryland
      Posts
      552
      Country Flag: United States

      Component selection.

      Hows does one decide on a starting point on jets? Is it a cubic each/rpm deal like cfm rating?

      How about accelerator pump shots sizes?

      Needle/seats? How do I identify these?

      As stated some of the parts i've come across the info such as cfm, and power valve starting points.

      I guess I would like some recommendations on where to start tuning this carburater, but would also know the tought process behind each selection.

      My engine is a 406 sbc.
      10.5:1 compression
      221cc intake runner 2.08 valves
      244/244 hyd roller cam .597 lift
      victor jr intake

      As you can tell im still learning about the carb. Here is what I know.



      850 DP - 4781

      Primary side
      76 jet
      6.5 power valve
      30cc pump shot (i think)

      Secondary side
      82 jet
      8.5 power valve
      50c pump shot.

      Now in my notes from when I purchased the carb it has "31" for both primary and secondary sides written down, but has no details on what part they are referencing.

      I was having issues with fuel getting past the needle and seat on the primary side and swapped the needle and seat from my 650 into the 850 and that cured the problem. I think one was marked "101" and one was marked "H". Without double checking im unsure which is which.

      Once again I am fairly ignorant on the subject and would like to learn, so be gentle and try not to cost me too much.





    Advertise on Pro-Touring.com