Results 1 to 4 of 4
Thread: Another back spacre question
-
05-01-2008 #1
Registered User
- Join Date
- Jan 2008
- Posts
- 160
Another back spacre question
Guy's will a 10in wide wheel with 4in backspacing fit on a 69 camaro that has been minitubbed with a stock width axle,oh with a 295/50/15in tire.THANKS!
-
05-01-2008 #2
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
nope, your gonna want to go in more than that. 6" BS would be a better number.
To run that rim size properly you will need to narrow the rear end a bit. You looking for a nice deep lip rim?
What is your location.MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
-
05-02-2008 #3
Moderator / Sponsor
- Join Date
- Feb 2003
- Location
- Houston, TX
- Posts
- 3,446
MrQuick is correct, those are going the wrong direction on backspacing. We generally use 5.5" backspacing on a 10" wheel for the 69. If you go with less backspacing, it moves the wheel outwards, so it will hit the fender lip.
For a stock width axle, you only gain the ability to run a wider wheel than 10", but these inches are added to the backside of the wheel, not the front.Last edited by Nine Ball; 05-03-2008 at 07:17 PM.
-
05-03-2008 #4
Registered User
- Join Date
- Jan 2008
- Posts
- 160
Thanks for the reply's, I kind of figured this wouldn't work but thought I would ask,located in south alabama.THANKS AGAIN!
-
Reply With Quote
