Results 1 to 20 of 22
Thread: Procharger Giving Me FITS!
Threaded View
-
04-23-2008 #9
Registered User
- Join Date
- Aug 2004
- Location
- Kiler wisconson
- Posts
- 400
I was running 6psi with a 5inch pulley,, for every 1/4 of an inch in diameter smaller psi should go up 2-3psi,
I am running a 4.5 inch pulley.. THat should be good for 10-12psi easy..
I did add a pulley just below the supercharger to try and get more wrap on the supercharger pulley..
In the past i had heard the belt slipping, not something ive heard since i added the extra pulley
Project JUST-N-SANE
84' Camaro Z-28, 355CID,9.0-1 compression, ATI procharger 9psi (over 650HP),T56 6 speed, 3.73 Motive gears! 11.70 at 122mph in the 1/4 while babying the throttle to keep the tires hooked ,with pump gas! (NOW INTERCOOLED)
-
Reply With Quote
