Results 1 to 10 of 10
Thread: paxton question
Threaded View
-
02-04-2005 #1
Registered User
- Join Date
- Aug 2004
- Location
- absecon, new jersey
- Posts
- 405
paxton question
i just picked up an older paxton unit for my tpi ,i know its an older ball bearing style and im gone to freshen it up anyway.Do i need to run a blow off valve?I know if i do ill have it blow back in it since im running a maf setup.Also i got everything for the tpi setup to install it but is my combination ok with a 8lb pulley.Im not looking for a ton of extra power just something more then what i got.I got everything included for $500 with new pulleys and plate.
360 ci
kb hyper pistons-flat tops 2 valve reliefs-block decked at 10 in the hole
ported upper intake and lower intake and runners(stealth ram in the works)
24 lb motorsport injectors
sportsman 2 heads
1 3/4 hooker headers with 4 inch sidepipes
700r4-2100 stall
3.70 gears
zz4 cam
125 shot of nitrous
msd
255 walbro pump73 corvette chop top silver LS6 motor ,LS6 intake,700r4,2400 pro torque convertor ,3.70 gears,modified hooker sidepipes to fit LS1,17 x9.5 boyd starburst,nitto 275/50/17-255/50/17 tires,vb&p suspension,nitrous,L-88 headlights,autometer guages.L88 hood,flares,spreader bar,vb&p sway bars
-
Reply With Quote
