SED Spindle

[nkopper]

The SED spindle was used on the Thrasher, not the Red Witch. The Red Witch used a 'vette spindle with modified factory control arms. I guess it didn't work that great. The original SED spindle is about 1" taller than stock, uses a C4 'Vette sealed bearing assembly, and allows 13" C4 'Vette style brakes to bolt up with no adapters. According to Mark's write up on the Thrasher in CHP (I think), the spindle allows for increased caster, a vastly improved camber curve, and neglible bump steer when set up properly. Tyler at ATS will be producing these in the near future.



Nathan