pull/pushrod suspension

[796spdbu]

I have been working on a coilover design for the cyclone/typhoon for the last few months and I have figured out that I can mount a coilover stock frame mount on top.The lower link plate I have designed,has a mount for the lower coilover.I can post pics of my plate I had fabricated. From where you are mounting your coil over at,by the stock fuel tank cross member,I cant see you being able to run a very long coilover. You stated you wanted extra room for MI roads. My design gives you 4.5" to the ground from the frame. I designed my "kit" from a cyclone that was lowered 3" more than a factory cyclone. There for I dont see your 4-5" drop being a problem. I designed my "kit" to be a bolt on deal, that way if they decided to return there trucks back to stock they could with out a hassle. Hope this helps.