Results 1 to 5 of 5
Thread: DSE mini tub question
-
02-12-2008 #1
Registered User
- Join Date
- Aug 2007
- Location
- Monroe, ct
- Posts
- 56
DSE mini tub question
I am going to be installing the dse kit and i was wondering if you take the flange from the old inner wheel housing off the outer wheel house. In the video they dont show them removing the flange. the cut the inner out and then just put the new one in?? what im asking is do i remove the flange or leave it?
-
02-12-2008 #2
Registered User
- Join Date
- Oct 2007
- Posts
- 16
I installed the DSE tubs on my nova and left the old flange on
02-12-2008 #3
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
Yep, They used to drill out all the spot welds but now you just cut flush to the flange grind flat and plug weld the new tub to it. A lot stronger.
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
02-13-2008 #4
Registered User
- Join Date
- Aug 2007
- Location
- Monroe, ct
- Posts
- 56
Thanks guys for the info. no one was exactly clear and the dse video did nothing.
Trevor
02-13-2008 #5
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
Reply With Quote
