Boomer Sooner!

[RudeJester.s10]

Howdy all...new member to boards, but def not new to wrenches. Currently working on two rides.....one being my 92 s-10 and the other an 84 Monte Carlo-w! Truck has some serious roid rage....with lots of nascar parts/ideas...thanks Muscle Motorsports! Ex super shops counterman, and long time parts counter guy turned business owner.....nice to meet ya'll!

[go-fish]

Boomer Sooner. I grew up just outside of Norman. Long time season ticket holder. Down in Tiger Kountry now. Damn LSU!
Good to have you here. Got any pics of the NASTruck stuff?

[SixSpeed454SS]

Welcome...Pics of both the truck & Monte?

[RudeJester.s10]

Yes I have some pics of the truck in its last incarnation....its in its third re-incarnation now...no pics of the monte as its just sitting behind the shop.....have started buying some parts for it though.....ss nose and the peices to fit..these are pics of the truck headed to body shop to get the paint done....its trojan red with white-yellow-orange scallops with a pink clear~! It used to be nice it will be again~

[TPI Monte SS]

Welcome aboard from a fellow G-body owner, and good luck with your projects!

[RudeJester.s10]

thanks again for the welcomes! today i got the 4 link kit finally! two weeks of waiting.... this is nice stuff and i got it all 4 500 stones shipped! powder coating is wrong color but thats an easy fix....oddly enough it was more to have it in raw steel?? wonder why?? ,,,POST EDITED FOR CONTENT (by myself btw)

[RudeJester.s10]

heres some pics after i got it back from brother...long story short i let my lil bro drive it to college and when i got it back it was junk! so the first thing i did was v8 it this is the last time it ran b4 i started into in this time! while i was doing this is dropped it and threw some tires on some centerlines i had...i now have some z-06 wheels for it and will be a manual trans again soon!

last pic is some inspiration for me

[Mr.VENGEANCE]

haha

one of your inspirations just so happens to be a post whore on here like me..

welcome!

[RudeJester.s10]

post whore eh??? i have that pic saved as that is the stance i want...the front bumper on mine is diff...in fact its the stock one smoothed with an aluminum airdam made to mimic the stock plastic one...the turn signal holes are now inlets for what will be the brake ducts. Im near complete with it and will post pics of it in the morning! btw do you know if that truck has been finished?? or what progress has been made?

[Mr.VENGEANCE]

yes look up syborgtt on here.. he posts alot.

and his truck is the first truck on your inspirations list..

cool guy too.

[MuscleRodz]

Marty's truck should be about ready for paint or in paint now. It was on hold while a couple of SEMA projects was finished. To get his stance and be driveable you are gonna have drop some $$$ to get it done right. He has built this truck right and hasn't overlooked a single detail building it. Marty is a cool guy, most the entire build is on this site somewhere.

Mike

[RudeJester.s10]

yes look up syborgtt on here.. he posts alot.

and his truck is the first truck on your inspirations list..

cool guy too.

well the first is the inspiration the other two are pics of mine... thanks ill prolly ask him a ton of ?"s!

[RudeJester.s10]

Marty's truck should be about ready for paint or in paint now. It was on hold while a couple of SEMA projects was finished. To get his stance and be driveable you are gonna have drop some $$$ to get it done right. He has built this truck right and hasn't overlooked a single detail building it. Marty is a cool guy, most the entire build is on this site somewhere.

Mike

thanks ive got the stance right in the front you can see in pics the rear in pics is still with leaves and a 3 inch blk...i have a four link setup that will be installed as soon as the body shop has the sheetmetal off the frame...its a setup for bags but the kit didnt already have the bag mounts in place so its perfect for me cause ill use some coilovers...with the coilovers in front and rear i should be able to get the height and ride i want...just dont know what yet to do about the rear sway bar...maybe a watts link?!?!

thanks for the info and thanks again for the welcome ..from what i see so far you boys (and gals) are a friendly bunch!

[RudeJester.s10]

So after posting the prices of my wares...I was told that was a no-no and after a few months of getting over my butt hurt..lol...Im back and with a new project. Starting on Project "Devil Inside"....

The first pick is of the truck when I bought it....550 bux and drove it home...200k plus and runs great.

The second pic is after installing the new composite leaves and blocks....

The third is after the front springs/spindles/uca's and shocks were installed...

With better bushings and relocating the upper shock mounts in the rear it is starting to turn much better...

As of now I have some 88 ish z28 15's on it...and under hard cornering they rub the spindles in front...

As for anyone building an s10...c5 wheels do not directly bolt on..it takes spacers and some fender rolling to make it happen.

[RudeJester.s10]

Correction...the pics of the front are after the uca's and springs and it sat too high so I did the spindles too.

[RudeJester.s10]

Here is a few more pics after the Z28 wheels and the drop spindles.

Im gonna move this to the update section as we are about to start on the rear end swap/4 link kit and some wheels.

I dont wanna give too much away....but the rear isnt the normal 9 inch swap....and the motor to come??...I guarantee its "outside the box"!

[RudeJester.s10]

Grrrr..pics too big lmao...mod please move to *update* section.

[RudeJester.s10]

Well, even more updates....Ive since sold the s10 (made some good dough on that one) and re-bought the 85 Monte back. Its it good but bad shape, meaning its beat up but not rusty. Its actually a 68k mile car but its been aggregiously neglected...sooo here it is...Project "sickneSS"

https://www.pro-touring.com/forum/sh...744#post418744