Results 1 to 10 of 10
Thread: Roll cage problem
Threaded View
-
02-06-2008 #1
Registered User
- Join Date
- Jan 2008
- Location
- SC
- Posts
- 501
Roll cage problem
This is a race car and has to meet some rules.
Back tubes can have no bends, back tubes must be no less than 30 degrees.
That makes them run outward and right into the bulkhead. See pics.
This is by the SCCA rule book. But I'll be running HSR and NASA which doesn't really have one. I was told to go by SCCA and it would pass anything. One regular in HSR said to run them back the way I had them, (sorry no pic) but they were in the corner of the main hoop and ran straight back at about 25 degrees,
Am I missing something?
-
Reply With Quote
