C5 brake calipers and G-Body brake hoses?

[jdpolzin]

OK guys, I'm in the middle o my C5 brake/ATS spindle swap on my GN. I noticed that the bolt that holds the brake hoses onto the caliper in different. If I get a bolt for a C5 front caliper, will I be able to use my factory brake hoses? I just bought new hoses so I really hope so! Where is a good place to get this bolt? Thanks! -----Jeremy

[shep]

you can get the bolts from Kore3 http://www.kore3.com/proddetail.php?prod=10059-01 I could not find them locally, but where I live there are not many C5's. your stock GN lines should work provided that the banjo bolt fits through them and you are able to get a good seal.

[HectorM52]

you can get the bolts from Kore3 http://www.kore3.com/proddetail.php?prod=10059-01 I could not find them locally, but where I live there are not many C5's. your stock GN lines should work provided that the banjo bolt fits through them and you are able to get a good seal.

THANK YOU - I will be doing this part of my swap soon too!!

[Samckitt]

What shep said. Factory hoses, C5 bolts & washers, works fine. Call the dealer & get 2 of P/N 11570052, cost $5.28 each, & the washers.