Stainless AN fittings

[Tiger]

does anyone know if any companys make AN weld-in fittings and bulkheads in stainless steel?
I'd need some AN-6 and some AN-10 or AN-12 for gas tank fabrication.

thanks!

[parsonsj]

Andre

I never could find any. I ended up welding in ss pipe fittings and then used NPT-AN adapters.

jp

[CarlC]

Try a Parker store, or another industrial hydraulic distributor.

[zz3elcamino]

This is the joint right here. Godman Hi Performance, they carry all kinds of SS AN fittings, but they will cost you a pretty penny. Hope this helps you out!

http://www.godmanhiperformance.com/

Jason

[Twentyover]

If you can't find weld in fittings, take a tube to tube fitting, cut one end off and weld the other?

[ironworks]

There is a company that sells them, but I cannot remember what it is called. It is on my favorites on mywork computer. They sell everything. I have to reorder brake line fitting tommorrow.

Rodger

[ironworks]

www.jdaent.com

[Tiger]

www.jdaent.com

thanx!

[Tiger]

thanks guys!
I'll look into the Goodman page and see if they have what I need.
in the meantime I've found that Isa Racing in Germany have them but in AN-6 AN-8 only.

I want to build a tank that for now will be used for a carbed smallblock but I want it to be ready for a carbed or EFI smallblock with around 7-800HP in case I ever get rich.
What size fittings should I use? my idea was 2x AN-6 (one vent and one return) and then one AN-10 for fuel.

[Tiger]

John,

where did you get your stainless NPT weldins? it doent seem like these guys have any, they do indeed hve bulkheads and NPT-AN adapters :o)

thanks again

[ironworks]

I spent about 1000 bucks this morning on there parts. Stainless arp bolts and Stainless brake line fitting.

Rodger

[Tiger]

I ended up getting what I needed from JDA, great service and fast shipping.

[Twin_Turbo]

i must be blind, can't find weld fittings in stainless on JDA site, only stainless adapters which would have to be cut. Max size is also dash 12 :( I need 16 for my dry sump stuff...dang!

[Tiger]

I bought stainless adapters that are to be cut.

anyone have an Idea for a fuel tank cap that is to be fitted on the end of a 2" stainless tube?

thanks!

[Olav]

I bought stainless adapters that are to be cut.

anyone have an Idea for a fuel tank cap that is to be fitted on the end of a 2" stainless tube?

thanks!

https://www.burtonpower.com/product_...px?CCode=PC800


Olav

[scotzilla]

tmr in orange , ca
714-771-1348

GOod prices too-

[Tiger]

The JDA parts finally arrived to Europe today, absolutely top shelf parts.
Service was great to

[Tiger]

thanks Olav, I appreciate it
I already bought this one though

[Olav]

Marine filler caps..... remember to make vent on the tank, these are water tight/ sealed.

Olav

[Tiger]

yeah I will have a vent with a rollover valve.

I know all about not vented tanks, several years ago I changed the gas cap because the old one leaked, I managed to get a non vented cap and after about 50km the tank was flat. :o)