Results 1 to 11 of 11
Thread: Primer after blastin
Hybrid View
-
12-18-2007 #1
Registered User
- Join Date
- Sep 2007
- Location
- Elizabeth City NC
- Posts
- 233
nope You need a epoxy primer to go over bare metal or you can metal etch first then use your urethane but the epoxy is best
67 camaro
-
12-18-2007 #2
Starting The Transformation
- Join Date
- Nov 2007
- Location
- Moore, Ok
- Posts
- 103
I used etching primer.
12-18-2007 #3
Registered User
- Join Date
- Aug 2004
- Location
- CT
- Posts
- 823
I also used epoxy primer.
12-18-2007 #4
Registered User
- Join Date
- Feb 2007
- Location
- USA, TN
- Posts
- 850
I'd use the epoxy primer. Etching primer has limitations as to what goes on top and I don't think it seals out moisture.
12-18-2007 #5
Registered User
- Join Date
- Sep 2007
- Location
- Elizabeth City NC
- Posts
- 233
You are right etch primer will not seal out moisture but the urethane will. seems much easier to just put a coat of the epoxy on than to etch prime then put the urethane on.
Originally Posted by TnBlkC230WZ
67 camaro
Reply With Quote
