Modding a Rigid Bandsaw to cut steel

[astroracer]

I just bought an older, taiwanese style 14" saw on eBay for $132.50. It is supposed to be a dual type saw. Wood and metal. Used very little and kept in storage, out of the weather. I will be picking it up Saturday.
Obviously I can't give you any info until I get it in my shop and check it out but this was a hellofa deal and I'll be able to throw some time and money at it too get it up to speed.
I will post some pics next week.
Mark

[JohnUlaszek]

The thing to keep in mind is that you need to be down around 80 SFPM minute to cut sheet metal properly. Most of the dual purpose machines have a low speed that is way too fast. They claim they are good for metal but are typically around 700 SFPM on the low speed which will cut aluminum sheet but not well.

Let us know how your machine works and if you can mod it to run slower.
There is a real need for a hobbiests band saw for cutting steel and as of yet Pauls solution is the only one I would consider affordable if he decides to start making them.

John