max g chassis is a go!

[absolom]

got the go ahead to order the max g chassis for our 65 fastback project

been a while since i posted, but it's 03 cobra drivetrain going in it, gonna port the blower and do boltons, should be good for 500 at the wheels or so, we're preparing to order the chassis and wheels

any tips on the measurements and everything that is need for the ordering process?

i love hearing stories and pics about people who have used a chassis before



here's a render

[hotrdblder]

killer, who did the rendering?

[absolom]

killer, who did the rendering?

family friend, i just picked out all the elements from reference shots that we want

he did a damn good job

:D

[SDMAN]

I have a project going with a Max-G chassis. It didnt show up until about 3 weeks ago, so we are still finalizing the rear suspension and working out the mods to the rear frame rails (for tire room). Unfortunately, Budnik is 6-8 weeks out, so we will not have wheels until the end of November.

What are the details of your chassis order?

[absolom]

I have a project going with a Max-G chassis. It didnt show up until about 3 weeks ago, so we are still finalizing the rear suspension and working out the mods to the rear frame rails (for tire room). Unfortunately, Budnik is 6-8 weeks out, so we will not have wheels until the end of November.

What are the details of your chassis order?

we're getting a full roller, complete with strange 9 inch, 31 spline, 12.19 wilwoods in back, 13 inch drilled/slotted front wilwoods, AM front ifs, 4 bar rear suspension, and strange coilovers

we're finalizing wheel sizes now, gonna go with 18x10 in the back with 4.5 inch lip, and 18x7 in the front with a 4.75 BS as of now

do you have any pics of your build and what car is it going under?

[SDMAN]

A few pics. 3rd page...look for 70 GTO part 2. Im using all C-5 in the front. Out back will be a custom 4 bar with a watts, locating a Mark Williams modular 9". Wheels are 18x11 in front and 18x15 out back. Also using the Strange coil overs, but went with the double adjustable. For brakes I am going with Baer 6 piston monoblocks all 4 corners on 14" 2 piece rotors.
Wont have to many pics to post until the wheels get here. Until then, other than finalizing the rear suspension, not much we can do.

[absolom]

A few pics. 3rd page...look for 70 GTO part 2. Im using all C-5 in the front. Out back will be a custom 4 bar with a watts, locating a Mark Williams modular 9". Wheels are 18x11 in front and 18x15 out back. Also using the Strange coil overs, but went with the double adjustable. For brakes I am going with Baer 6 piston monoblocks all 4 corners on 14" 2 piece rotors.
Wont have to many pics to post until the wheels get here. Until then, other than finalizing the rear suspension, not much we can do.

wow, that will be freaking awesome, it'll have a killer stance