Push Button Start with Passive Device Key wanted

[matty b]

The rfid is the easy part coming up with a way to make one button act like a three-way switch is entirely different. The digital gaurd dawg setup is for motorcycles that has an ignition button and a start button and it bypasses the key cylinder that normal turns the bike on. It wont do the one button start though and thats what everyone is looking to do. If you want simple I drew out a diagram up the page that will do an ignition on and start and would be very easy to do. My module on the other hand works exactly like an ignition switch would with an acc, ign and start mode with 1 switch and works independently of all other switches in the car. Also my box is the same price as that digital gaurd dog unit approximately and has rfid and all the wiring setup to drop into a car very simple clean and easy to do for a diy'er. That rfid alarm would work with my setup also as will any alarm. The module switched on by through the starter kill circuit so instead of just disabling the starter it disables the whole ignition switch.