Manual to Power steering Conversion

[68BNUT]

Ok ive seen the threads talking about the manual to power steering arm swaps but ive heard recently that you can put a 2nd or 3rd gen power steering box into a 1st gen camaro??? I have manual steering now and was wondering if anybody has done this swap??? or knows some websites that go over it??

Thanks

[68BNUT]

or not

[jeffandre]

This has been discussed in detail somewhere in the old forum posts. I put a 3rd Gen quick ratio steerin gbox in my 2nd Gen and only had to change 1 item: the high pressure hose needed a metric fitting, so I had a new hose made for about 15 bucks (nearly 15 years ago).

I vaguely recall that 1st Gens needed a different pitman arm, not sure if it is the 3rd Gen one or a different stock one? I think David Pozzi knows.

If your car is going to be used occasionally for any type of serious corner carving you might want to check into a cooler and a filter.

[68BNUT]

Nah not to serious of a corner carver just the 17x8's are a little tough on the forearms to turn at a stop you know. Ive been filtering through pozzi's site. I was just looking for someones site that says this is what you need and this is how you do it. If I got all my parts from a 3rd gen I guess I wouldnt need to get a different fitting hose???