Any comments on this Tig welder

[meenaggie]

Not only is it 3 phase but it may be setup for 50 HZ if it is designed to use in Europe (instead of 60 HZ in the USA). Be patient and you will find a good machine at a good price. I picked up a barely used Miller Snycrowave 180 with full argon bottle for $1300 (single phase, 240V / 50A). Remember the gas bottles can get expensive so if you buy used figure that in.

[Olav]

I've never heard of the brand. Do they have a website, or do you have any more information on the welder that you can maybe scan and attach here?

Assuming a good machine, a 250 will weld any thickness steel, and aluminum and mag up to about 3/8" with no pre-heat.

Kempii is a very commond brand. I'm working as a mechanichal supervisor at a shipyard ( www.gmc.no) Kempii is the only brand we are using. TIG, MIG/MAG and Arc.

I also have a 15 year old MIG myself and its working perfect.

Olav