Results 1 to 20 of 33
Thread: C5 template/ drawing
Hybrid View
-
10-16-2007 #1
Registered User
- Join Date
- Oct 2006
- Location
- Norway
- Posts
- 513
template
I have the C5 calipers and rotors. Not the LS .... The drawings you have will they fit?
Thanks
Olav
-
10-16-2007 #2
Registered User
- Join Date
- Dec 2005
- Location
- Dublin, CA
- Posts
- 502
Hmm, the calipers are interchangable I believe, but the C5 caliper bracket uses 14mm bolts, where as the LS setup uses 12mm. Not sure of the spacing between bolt holes. Mine is not fancy or pretty, but it works. I a strip of 2" wide 1/4' steel for the bracket.
Originally Posted by Olav
Don't the washers give it a custom look?
I found my templete, but looks like the mice got to it a bit. Here are the dementions:
5" between caliper bracket holes
7 5/8" between spindle holes
The two holes for the caliper bracket were centered between the spindle holes and 11/32" below them.
Makes a bit more sense if you look at the photos above. BTW, I drilled out and retapped my spindle mounting holes. Can't remember, but think I resized them to 7/16". Hope that helps.
Brent
Reply With Quote
