Results 1 to 5 of 5
Threaded View
-
01-02-2005 #1
Registered User
- Join Date
- Sep 2004
- Location
- Macon, Georgia
- Posts
- 19
Pressing studs from drum hubs...Help.
I'm about to press the studs out of a set of drum hubs. The studs appear to be dimpled or swedged in mechanically from the factory after they were pressed in. I assume that was to make sure they were tight in the hub. Will this dimpling in the stud destroy the bore for the stud when pressing the studs out? Any body ever noticed this prior to pressing the studs out?
-
Reply With Quote
