Results 1 to 5 of 5
Thread: Corvette C5 to Mustang II
-
07-23-2007 #1
Registered User
- Join Date
- Dec 2006
- Location
- Preastoe, Denmark, Europe
- Posts
- 22
Corvette C5 to Mustang II
Has anyone fitted C5 brakes to their Mustang II spindles? I am going to have Mustang II suspension on my 67 Nova, but i would like to have C5 brakes on the front and rear. My main concern at the moment is on the front, but i will most likely have some issues on the rear as well. But has anyone tried this combination on the front?
-
07-26-2007 #2
Registered User
- Join Date
- Oct 2004
- Location
- NJ
- Posts
- 769
Wilwood makes a nice big brake set up for mustang II 6 piston 13 in rotor
07-27-2007 #3
Registered User
- Join Date
- Dec 2006
- Location
- Preastoe, Denmark, Europe
- Posts
- 22
Do you have a link for that kit?
But it is most likely more costly than an setup with C5 brakes. And they will be almost as good in my opinion.
09-19-2007 #4
Registered User
- Join Date
- May 2001
- Location
- Mesa, Az.
- Posts
- 1,434
Bump!!
I have C5 rotors and calipers and am also looking for info on adapting them to the Mustang II on my Studebaker
10-16-2007 #5
Registered User
- Join Date
- Nov 2006
- Location
- Cincinnati Ohio
- Posts
- 1,060
I know this is a old thread,
But i have a truck here im doing a MMII front end and i have my C5 stuff here, and i got everything mocked up. Little bit of S-10 stuff and little bit of the MMII kit stuff and they will work.
One of the guys for a brake company was here saturday and we were talking about big brakes for MMII set up and him and i are going to be working on a set up.
Reply With Quote
