Results 1 to 7 of 7
Thread: Tie rod replacements??
-
09-23-2005 #1
Registered User
- Join Date
- Sep 2005
- Location
- Silicon Valley, CA
- Posts
- 95
Tie rod replacements??
Looking into my engine compartment everything is nice. But then you have the steering linkage. Anyone make stuff out of tubing and clevis ends before??
Suggestions or comments??
figure they are lighter and look nicer, obviously a rack and pinion would solve the problem, but at this point in time, it isnt in the cards
Thanks
Rob
4RS FED
1973 turbo camaro RS
™
-
09-23-2005 #2
Registered User
- Join Date
- Aug 2004
- Location
- OK
- Posts
- 767
http://www.speedtech-performance.com...%20sleeves.htm
http://www.detroitspeed.com/09010210.html
maybe something like this? I am not sure exactly what you are looking for.
09-23-2005 #3
Registered User
- Join Date
- Sep 2005
- Location
- Silicon Valley, CA
- Posts
- 95
no i was thinking of somethig like a panhard bar, tubing compltelty instead of ball joints??
make any sense??™
09-26-2005 #4
Registered User
- Join Date
- Sep 2005
- Location
- Silicon Valley, CA
- Posts
- 95
no other ideas
™
09-26-2005 #5
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,114
Yes, don't do it!
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
09-26-2005 #6
Registered User
- Join Date
- Sep 2002
- Location
- San Jose, CA
- Posts
- 1,793
The Baer Trackers are a very nice look...
Hiem Joint with a Cast reverse threaded sleeve for outer tie rod
Custom Alignment in Mountain View offers their own version1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD
But ask me about my 2004 STi Auto-x car...
Just call me Brett
07-28-2007 #7
Registered User
- Join Date
- Sep 2005
- Location
- Silicon Valley, CA
- Posts
- 95
any new ideas
™
Reply With Quote
