Results 1 to 6 of 6
Thread: grease for poly bushing's
-
06-28-2007 #1
Registered User
- Join Date
- Aug 2006
- Location
- fort myers florida
- Posts
- 200
grease for poly bushing's
Is there a special grease to use on poly bushing's for front control arm's? Or just use same old grease i use on balljoint's and tie rod's.
-
06-28-2007 #2
Registered User
- Join Date
- Sep 2006
- Location
- New York, NY
- Posts
- 458
http://energysuspension.com/pages/univ2.html
http://www.spohn.net/product.cfm?productid=1322
no petroleum based grease
-
06-28-2007 #3
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
Everyone I put in I used Mobile One Synthetic and never had a problem and I used to put a ton of poly bushings in at one job where I was alignment tech for almost 7 yrs.
That stuff from Spohn is probably real good and priced pertty good.
06-29-2007 #4
Registered User
- Join Date
- Sep 2002
- Location
- San Jose, CA
- Posts
- 1,793
I'm not a fan of poly bushings in general - but when using them I've always used the Redline or Amsoil full synthetic grease
1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD
But ask me about my 2004 STi Auto-x car...
Just call me Brett
06-29-2007 #5
Registered User
- Join Date
- Oct 2005
- Location
- Jasper,IN
- Posts
- 540
Any non-petroleum based lubricate will do the job, such as lithium or silicon. Do not use ball joint grease.
Last edited by darren@ridetech; 06-29-2007 at 07:52 AM.
06-29-2007 #6
Registered User
- Join Date
- Dec 2006
- Location
- Lodi, Ca
- Posts
- 82
Water proof boat wheel bearing grease works good also.
1973 TA G Machine
2000 BMW 540 G Sedan
Reply With Quote
