Results 1 to 6 of 6
Threaded View
-
06-26-2007 #3
Registered User
- Join Date
- Jun 2007
- Posts
- 9
Thanks for the response. I am running a power booster, with dial style proportioning valve in rear line (from summit) but no distibution block, just a T into the two front lines. I think I have figured out the problem (after bleeding the system 4 times!) I had a rebuilt caliper on the rear passenger side, and after talking to Noel at Touring Classics, I determined that the caliper was bad (pretty sure the piston seal was leaking). Going to the parts store tomorrow to pick up a new one. I hope this works, i need a car to drive!
-





Reply With Quote



