Brake fitting question,(pics)

[silver69camaro]

I would not recommend welding a bracket to the U-bolt. The weld is going to turn into a big stress riser and possibly cause premature failure, not to mention the effects of heat on the bolt.

I agree 100%. And believe me, that hard line will vibrate as the car is driven with that flex line dangling off of it like that. That must be secured, period.

Also, 45* degree flares will often seal up to a 37* fitting. I didn't say it was correct, but it does work and has been done many times. However, it is much more effective when the sleeve/nut type of fittings is used.