Results 1 to 6 of 6
Thread: Aerospace Components
Threaded View
-
05-11-2007 #1
Registered User
- Join Date
- Aug 2004
- Location
- cookeville, tennessee
- Posts
- 117
Aerospace Components
I recently traded for some chevelle parts, one of which was a rear disk brake setup from aerospace components. I am not familiar with this company or their parts. The calipers are four piston billet calipers with a 1.75" bore, rotors are 11.75 x .81". Here are my Q's
1. what are the pros/cons of this company's products?
2. If I choose to keep this setup, how will I balance the front/rear
braking, due to the aerospace components front calipers having
the same bore as the rear calipers?
I am leary of using this stuff and having to use just an adj. prop. valve. I have had problems in the past with balancing the brakes on my chevelle and do not wish to repeat that again. Thanks for any help.
Jake
-
Reply With Quote
