327 engine upgrades

[rlplive]

Hey guys how's it going? I have a 69 camaro with a 327. This is what I know about the engine, it is bored .60 over, it has upgraded heads with z28 springs, I am not sure exactly what has been done to the heads. It has an edelbrock intake and a holley carb. It also has an hei distributor. I would like to switch out the carb and intake with something that will make this thing run pretty good.
It is going to have a t56 tranny and a moser 12 bolt with 373's. Any help will be appreciated. here are the cam specs
Operating Range: 1500-5500 RPM
Duration Advertised: 268° Intake / 268° Exhaust
Duration @ .050'' Lift: 218° Intake / 218° Exhaust
Valve Lift w/1.5 Rockers: .454'' Intake / .454'' Exhaust
Lobe Separation Angle: 110°
Thanks a lot
Ryan