Where to buy MS exhaust bends/donuts?

[super_kev]

I know that Stainless Works sells SS pipe and bends, but I couldn't find any mild steel exhaust tubing (hence the name SW). I don't have a TIG at the moment, but I want to be able to finish my exhaust and make sure it's working all right. Eventually I'll build a turbo setup and redo the exhaust, so I don't feel like dropping the $ for a SS system right now, especially if I don't have the equipment to weld it. Who sells MS bends, donuts, flanges and the like?

[BlackGMC]

http://store.airflo.com/exhaust-elbows.html

They have alot more stuff, so if you see something that is not in the online store give them a call.

[myclone]

www.chassisshop.com
Mild steel donuts can be bought here. Be aware that availability can sometimes be a problem with mild and SS donuts and the last time I ordered some SS donuts they were back ordered for a couple weeks. If they have them in stock theyll ship right away but if not you may have to wait a little while.

Jegs.com summitracing.com both sell mandrel mild steel bends but no donuts.

http://www.roadraceengineering.com/mandrelbends.htm sells mild steel mandrel bends fairly cheap.

http://www.atpturbo.com/Merchant2/me...egory_Code=PPB
More bends here.

http://store.racing-solutions.org/mandrelbends.html
More bends here too.

HTH

[super_kev]

Thanks guys.

[MonzaRacer]

with the right wire and gas you can mig stainless ,,,heck i have seen some guys gas weld it to.

[BlackGMC]

with the right wire and gas you can mig stainless ,,,heck i have seen some guys gas weld it to.

I have heard that too, but I thought you had to change the gas to 90/10 or 100 instead of 75/25.

[super_kev]

Bringing this back from the dead, as I'm almost ready to order... why are most of these guys selling aluminized steel tubing? Is it still MIG weldable like mild steel?

[Steve68]

Its so it dosent rust,

[molyorange 77]

Yes it is weldable.