Results 1 to 3 of 3
-
03-28-2007 #1
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,963
I need AN fittings on an LT1 power steering pump
How do I connect AN hoses to an LT1 power steering pump?
Scot
86 Monte SS
-
03-30-2007 #2
Registered User
- Join Date
- Aug 2004
- Location
- Jacksonville, FL
- Posts
- 1,666
AN fitting
I believe you need a 16 mm o-ring to AN6 (if you are using a size 6 line) fitting, if you are talkijng about the high pressure line on the pump. Call Paul at Hydratech, he knows all about the correct size info.
Chris
1968 Chevy Camaro SS
LT4 (coming)/T56 DSE suspension
1969 Oldsmobile Cutlass S convertible (442 Clone)
LS3/4L70e, DSE suspension
03-30-2007 #3
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,963
Initially I was thinking the hose I needed it for was a slip on connection. Dummy me, that is the high pressure side & has a screw on connection. Won't be as tough as I thought. Does the outlet of the reservoir need to be higher than the inlet of the pump? Or just the fluid level higher than the inlet? If the outlet of reservoir needs to be higher, I may have a tough time finding a place to mount it.
ThanksScot
86 Monte SS
Reply With Quote
