ALIGNMENT SPECS FOR 2nd gen

[dan10101]

For a street car I`d shoot for -1/2* camber, +5* to +5.5* caster and 1/16" total toe in. If it`s an occasional use car and you really like the twisties you could go to -1* camber and 0 toe. Any more than that and tire wear may becoem an issue. Mark SC&C

Camber 0 to -1/2
I tend to agree with Mark on this one. I spent 10+ years under an alignment rack. Anything more than +3/4* will wear the outside edges.

Notice we're talking + and - here.

Ya, I'm new. But old too..
Dan