Results 1 to 7 of 7
-
03-12-2007 #1
Registered User
- Join Date
- Dec 2006
- Location
- Arlington Heights, IL
- Posts
- 792
Will LS1 brakes fit on ATS spindles?
im tryin to go as cheap as possible for disc brakes. I was going to put the C5 kit on but i need cheaper since i wanna drive my car this spring. Will the ls1 brakes fit on my ats front spindles?
thanks
Jesse
1969 Camaro under construction.
1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)
-
03-12-2007 #2
Banned
- Join Date
- Feb 2007
- Location
- East Freetown, MA
- Posts
- 513
I don't think so....
Look to e-bay. Every once in a while they have a set of used C5 stuff when someone upgrades..
Also try local junkyards.
03-13-2007 #3
Registered User
- Join Date
- Jan 2006
- Location
- Houston, Tx
- Posts
- 1,004
you will have to use C5 Abutements and Rotors. LS1 calipers will work though (they are the same dimensions as c5 calipers)
03-14-2007 #4
Registered User
- Join Date
- Aug 2004
- Posts
- 77
Jesse,
How cheap are you talking?
Loaded PBR calipers w/o the 'vette logo (abutments, pads etc.) are $250 for the pair from us and plain rotors run $35 a side.
www.EngineeredVelocity.com
Not sure if that fits into your cheap budget, but thought I would throw that out there.
Joe
03-14-2007 #5
Registered User
- Join Date
- Jun 2006
- Location
- Katy,TX
- Posts
- 1,678
Rotor diameter on the tall spindle kit?
03-14-2007 #6
Registered User
- Join Date
- Aug 2004
- Posts
- 77
Skip,
Not sure if your talking to me, but for our tall spindle kit the rotors are C5/C6 'vette 12.8"x1.25".
Joe
03-14-2007 #7
Banned
- Join Date
- Feb 2007
- Location
- East Freetown, MA
- Posts
- 513
You can get the standard rotors from NAPA for $28 per side...
Reply With Quote
