Results 1 to 9 of 9
-
12-09-2004 #1
Registered User
- Join Date
- Aug 2004
- Location
- Santa Barbara
- Posts
- 91
pictures of new z06 plus ls7 500hp engine
this would be a great powerplant in a camaro.
http://www.structuredchaos.net/image...6%20engine.jpg
http://www.structuredchaos.net/image...Z06%20race.jpg
http://www.structuredchaos.net/images/Z06/Z06%20rim.jpg
http://www.structuredchaos.net/image...Z06%20side.jpg
http://www.structuredchaos.net/images/Z06/seat.jpg
0 -> 60 in 3.8 sec.
Top Speed 200 MPH
2,900 #'s
5.7 #'s/HP
Chassis & Suspension development by Pratt & Miller,
Aluminum Hydroformed frame produced by DANA
- 345/30x19 Rears
- 6 piston Front, 4 piston Rear Brake Calipers
- Cross Drilled (cast and camfered) Rotors (possibly Brembo)
Engine Development by KaTech
To be hand built by new HP Engine Plant
LS7 427ci/ 7.0L. 500HP/500 Ft Lbs (512 HP derated to 500HP)
- 2 OHV (3 OHV not necessary for target HP)
- Raced based CNC ported Aluminum Head with 70cc chambers
- 11.0:1 CR
- 46 mm (1.81") Titanium Intake valve
- 41 mm (1.61") Na filled Exhaust Valve
- 104.8 mm Bore (4.125") , 101.6 mm Stroke (4.0") Aluminum block
- Forgrd Crank
- Forged 6 bolt main Bearing Caps
- Titanium Rods
- Cast Aluminum Flat Top Pistons
- 0.591" Lift Cam (15 mm)
- Dry Sump
- 90 mm Throttle Body on Composite manifold
- Ram Air
-
12-09-2004 #2
-Moderator/Rat Pack/Sponsor-
- Join Date
- Oct 2004
- Location
- Macon, Ga.
- Posts
- 8,085
z06
I saw that earlier today somewhere. Denny, Now I will take one of these LS. Black or yellow please!
Bill
Trailers are for BOATS!
12-09-2004 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 9
are those specs nailed down?! cause damn i think thats the first major productions car wiht dry sump oiling.....if its all correct...that thing will be the king of the hill for a long time to come.
Hunter
12-09-2004 #4
Registered User
- Join Date
- Jan 2003
- Location
- College Station, TX
- Posts
- 421
Hmmm.... titanium rods, forged crank, and CAST pistons.
-Brian<--- Artist formerly known as BlownSS502
12-09-2004 #5
Pro-Touring Veteran
- Join Date
- Jun 2002
- Location
- Long Island, NY
- Posts
- 11,320
Bitchin' car!! Those pics were all over the net, probably 2 seconds after they were leaked. Someone at GM must be in trouble? With regards to the dry sump, there is no oil fill, so it looks like it may be true?
12-09-2004 #6
Registered User
- Join Date
- Aug 2004
- Posts
- 9
I am guessing that they are using cast pistons to hold tighter clearances and reduce the piston slap noise.
12-09-2004 #7
Banned
- Join Date
- Mar 2003
- Location
- Boringville
- Posts
- 1,987
titanium rods and dry sump!!!!! Some how some of the specs seem a little too good to be true?
12-10-2004 #8
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
I have seen different pics of that Corvette and in my opinion it is the nicest one I have ever seen. Sounds like one heck of a performance package to go with it!
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
12-10-2004 #9
Moderator / Sponsor
- Join Date
- Feb 2003
- Location
- Houston, TX
- Posts
- 3,446
~plink!~
that was my first penny into the piggy bank. Might have to sell a couple Camaros to get one of those badboys.
Reply With Quote
