Results 1 to 10 of 10
Thread: DOM tube sizing G-brace again.
Hybrid View
-
02-24-2007 #1
Registered User
- Join Date
- Aug 2004
- Posts
- 2,413
DOM tube sizing G-brace again.
As some of you might have seen Im going to attempt a g-brace for my Nova
I come to realize I can not weld 4130 chromemoly with my MIg. So I guess Im looking at DOM or some other sort of Mild steel.
BonzoHansen measured his second gen g-braces for me and his are 1" OD
Wall thickness is what Im stuck on now. Will .065 be strong enough with only a 29" span and that span will also be supported with another bar triangulated about 1/2 way down the section. Or would .120 be a better choice.
Weight is an issue and over kill is not going to help or hurt in this area.
Also what will bend the best. I will need to make 2 tight bends and dont want collapsing or kinking. 3" radi bend (about)Nothing says "I built this" better than tool marks and dykem blue..
Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592
-
02-25-2007 #2
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Orlando, FL
- Posts
- 10,604
The bending part makes more difference than the weight wrt wall thickness. With DOM, you'll need .090, minimum. If it were me, I'd go to .120.
What kind of bender do you use?
jpJohn Parsons
UnRivaled Rides -- Modern upgrades for your ride.
UnRivaled Rides recent project -- LS9-powered 69 Camaro
02-25-2007 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 2,413
No bender as of yet.
Nothing says "I built this" better than tool marks and dykem blue..
Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592
02-25-2007 #4
Registered User
- Join Date
- Aug 2004
- Posts
- 2,413
just wanted to add this pic to see what Im dealing with. I think anything I choose will be stronger than the original peices
Nothing says "I built this" better than tool marks and dykem blue..
Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592
02-26-2007 #5
Registered User
- Join Date
- Dec 2004
- Location
- Houston Texas
- Posts
- 368
With .065" wall tubing you should be able to bend it +/- 4" radi but it will be close.
I would not waste your money on DOM tubing. Regular welded seam mild steel tubing will be fine and less than half the cost. Especially for something as simple as a g-brace.
So I'd go with something like 1"x.095" wall round tubing.68 Camaro - never to be finished
06 Silverado - Forged 370, L92 Heads, big cam, 4l80e ect. eventual donor for the above
http://www.youtube.com/watch?v=KmB2y7uX38I
02-26-2007 #6
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,963
What is the box with the 120V plug on it?
Scot
86 Monte SS
02-26-2007 #7
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Orlando, FL
- Posts
- 10,604
Zach's your man: 1 x .095 will work great for that.
jpJohn Parsons
UnRivaled Rides -- Modern upgrades for your ride.
UnRivaled Rides recent project -- LS9-powered 69 Camaro
02-26-2007 #8
Registered User
- Join Date
- Jan 2007
- Posts
- 232
i would go with at least .095 wall, and remember if you are going to use HREW keep the seam on the inside of the bend to prevent premature fatigue.
Jason
02-26-2007 #9
Registered User
- Join Date
- Aug 2004
- Posts
- 2,413
I made a price request with 71dusterdan for 1" .095 mild steel. lets see what he can come up with for a price.
Nothing says "I built this" better than tool marks and dykem blue..
Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592
02-27-2007 #10
Registered User
- Join Date
- Jan 2006
- Location
- Rockford, Il
- Posts
- 157
okay everybody i just shot him a buck and a half a foot at 16 lbs from zip 61102. the electric welded mild steel he wanted is something we do not stock so that quote is on 1" dom 13 gauge wall, or .095wall, if he is in love with mild steel i can get it , but this is what we keep on hand and is a credit card away from going out on the next ups truck. all smiles and hugs, call me tommorow low buck the number is in your pm box. Dan
Reply With Quote
