Voltgage problem

[David Pozzi]

No i dont have the horn reley. I have the alternator wire going to the starter. Thats what the painless wiring instuctions said to do.
is there another way i should of ran it?
-Josh

Well,
That's a different way than stock.
If your alt to starter wire is 10 gage, you might try an 8 gage wire. At idle with the Alt at full charge, you have max load on the alternator. Make sure your alternator is grounded and the battery ground cable attaches to the engine near the alternator.

Check that the belt is not slipping. The pulley will get hot after a running like that for a while if it is. I had a steel cad plated pulley get discolored because it was slipping.
David