springs

[dennis68]

Thanks for the heads up Jabin, these are coils though.



Yodi, it rides very nice. I was totally prepared for the locomotive harshness, not at all. In fact it rides better than before because it stays off the snubbers, firm instead of harsh. I think I will still play with a sta-bar, a small one just to see if it adds anything.

Ride height adjustment is very easy, just break the lower ball joint loose and lower the arm enough to remove tension from the spring. Then stick your hands up in the upper seat and make the nesessary adjustment. I would guess a rookie could do it in 30 minutes, takes me about 10. Funny thing is with the added rate I wound having to run the adjusters all the way down just to keep it the same height it was before. If I needed it any lower I would have to cut the top seat of the adjuster.