Bullrun

[FoxGranadaChuck]

Here you go - my suspension set-up is as follows:

Suspension
• Firm Feel Stage III Power Steering box, fast ratio pitman arm, idler, greaseable lower arm shafts and nylon lower arm bushings
• Energy Suspension bushings installed front to rear
• MagnumForce Racing fully adjustable tubular upper control arms – set at –5 degrees camber
• Hotchkis 1 3/8” Hallow front Sway Bar
• Addco 7/8” rear sway bar
• All ball joints and tie rods replaced
• Mopar Performance 1” pre-lowered Hemi rear leaf springs; 1” block lowering kit for a total of 2” in the rear
• Mopar Performance oversized front .96 torsion bars. Lowered to be just above bump stops
• Edelbrock Performer IAS Shocks
• XV Motorsports Chassie stiffening kit: Subframe connectors, engine brace, inner-fender well braces and radiator support.



Drive train
• 727 Torqueflite Transmission
• Has a reverse manual valve body shifter mechanism.
• Mopar 8 3/4” Suregrip rear with 3.55 gears
• Gear Vendors Over/Underdrive Unit w/final 2.76 ratio in OD
• Cheetah SCS reverse pattern cable driven shifter
• Moser 29 spline performance rear axles

What kind of brakes do you guys run?!