Project Psyko Cuda

[70Dustpan]

My I make some suggestions on your set-up?



First off I would fully well all the seams and reinforce the K frame like the ones you can get from Firm Feel.

http://www.firmfeel.com/reinfkfram_a.htm

2ND. I wouldn't go with any thing bigger then a 1.00" torsion bar for a SB street car. Any bigger and you won't get the car to sit low in the front and will ride like a 1 ton truck on the road.

3rd. Go with 11/16" tie rod ends with solid sleeves. No deflection and better feel.

4Th. Get a larger then stock front sway bar if you are going to run a rear bar. A 1 1/8" up front and a 3/4" in the rear work good together.

5Th. For strut rods the ones from RMS are the best ones out there. Adjustable, rod ends, and strong. https://www.reillymotorsports.com/st...6&cat=0&page=1