Results 1 to 4 of 4
Thread: Quarter & Roof Panel Replacement
-
01-15-2007 #1
Registered User
- Join Date
- Feb 2006
- Location
- Southeast Louisiana
- Posts
- 104
Quarter & Roof Panel Replacement
I need to change the driver's side quarter and roof panel on my 68 Camaro but would like to know what to fill the seam where these two meet with. It still has the factory lead in it now. Chances of me finding someone who can still do this is slim in my area.
Also, how is the best way to connect the bottom of the quarter to the rocker. I see some people using some sort of panel glue (for lack of better terms).
1968 Camaro, 350 SBC, TH350 w/3500 Stall, 12 Bolt, 4.56:1 Gears. Currently in progress...DSE Minitub Kit, DSE front suspension, DSE SFC's, 17" Budniks, Baer front and rear discs.
http://www.cardomain.com/ride/2391864
-
01-15-2007 #2
Registered User
- Join Date
- Oct 2005
- Location
- Odessa mo.
- Posts
- 925
I stitch weld the seam solid then use either marglas or duraglas as for the rocker seam I have used duramix 4178,4179,4176 but I usually just weld it.
some day it'll be done
https://www.pro-touring.com/showthre...ward&highlight=
01-16-2007 #3
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
All Metal Filler is the only way to go
01-16-2007 #4
Registered User
- Join Date
- Oct 2005
- Location
- Odessa mo.
- Posts
- 925
I completely forgot about All metal.
some day it'll be done
https://www.pro-touring.com/showthre...ward&highlight=
Reply With Quote
