Results 1 to 7 of 7
Thread: Truck information question
-
11-19-2006 #1
Registered User
- Join Date
- May 2005
- Location
- Socal, Ca
- Posts
- 924
Truck information question
Hello,
Where can I find the specs on a 1994 chevy blazer/tahoe?
The truck is a 6.5L turbo diesel, automatic, and red and grey.
Does anyone know if the transmission is the 4l60, 4l60e, or 4l80e?
David
-
11-19-2006 #2
Full Blown G-Machiner
- Join Date
- Nov 2004
- Location
- Roanoke, VA
- Posts
- 515
I may be wrong but Ive never seen anything that is full size with a diesel newer than late 80s/early 90s that had anything other than an 80E (not counting manual trans equiped trucks of course).
GMC Syclone (currently wrecked thanks to the typical rubber headed VA driver not paying attention to his red stop light...oh and he didnt have insurance either)
#614 11.9 @ 113
New stuff finished 08/06:
4L80E trans w/TCI PCM
Front: J&S UCA/LCA, QA1 coil overs
Rear: Caltracks/Belltech drop leaves
Empire drive line alum drive shaft
Polished 17x9 F/17x11 R ZR1s with 275s/315s
Syclone
Tow rig
11-20-2006 #3
Registered User
- Join Date
- Jan 2005
- Location
- Columbus, OH
- Posts
- 210
I think that they came with both 60E and 80E...the 60E has 16 trans pan bolts and the 80E has 17. I have a 92 Full-Size Blazer with the 350 and it has a 700R-4.
11-20-2006 #4
Registered User
- Join Date
- Feb 2006
- Location
- Elk Ridge, Utah
- Posts
- 602
Deisle Is going to be a TH400 or an 80
Other than that get under the truck and look at the pan
an 80 looks like a th400 with a little different shap at the back of the pan69 Camaro
W/D sub, Wilwood 13" brakes Bozeforged wheels 18X10 & 18X12,
Lateral dynamics 3 link ( custom setup ) Dana 60
lsX Twin Turbo, soon to come
Viper T56 in place (Yay)
Bought a running driving car so I can enjoy it before Im dead
LD 3 Link Installed into ^^^^^ (Yay)
11-20-2006 #5
Registered User
- Join Date
- Nov 2004
- Posts
- 261
David,
Look in your glove box where your service parts identification label is and look at the codes. Your ride should have a 4L80E (code MT1), if it's a 6.5 Turbo with an automatic.
Gerald
11-21-2006 #6
Registered User
- Join Date
- May 2005
- Location
- Socal, Ca
- Posts
- 924
To everyone,
Thanks.
Tubed,
I will check it out. Aww haa! Service Parts Identification 6 rows over + 3 down= MT1...Are you sure this means 4l80e? Update at 11:13: chevy agrees with you...Thanks
Madspeed,
I hope it has the 60e or 80e
12-15-2006 #7
Registered User
- Join Date
- Sep 2006
- Location
- Sault Ste. Marie
- Posts
- 112
Reply With Quote
