Paging NRE.... do tell

[ProStreet R/T]

http://www.nelsonracingengines.com/pix-rides-kong.html





twin 106's will be damn fun. But what tranny are you going to put behind that to make it even remotely a street car?

B&J solenoid shifted with OD? (it's similar to a lenco, but with OD)

[Dave95Z28]

The text in the link says a glide and a gear vendors overdrive.

Dave

[Tom Nelson]

We have been using a Bruno lenco 3speed which is Essentially a 3 speed stick with a torque converter and Monster powerglides behind the Warrior series engines which are all above 2500hp

[ProStreet R/T]

How is the monster glide+gear vendors unit working out? Have you guys really leaned on them in OD yet?

I need something that will hold 2500hp with a decent overdrive. Can't get a rear end with enough gear thats strong enough, or a tall enough tire to get the mph we're looking for. I've used the converter drive Lencos and played with a liberty recently, they are nice and very strong but a little much for a street car. And no OD is a bummer.

Who would have thought it would be so difficult to gear a car to run 270mph.... and get there quickly at that.

[justanova]

I've used the converter drive Lencos and played with a liberty recently, they are nice and very strong but a little much for a street car.

as if the 2500hp's isn't