Results 1 to 10 of 10
Thread: Gen 2 Vintage Air in 1st gen
Threaded View
-
03-06-2006 #1
Registered User
- Join Date
- Sep 2004
- Location
- Santa Barbara, Ca
- Posts
- 1,174
Gen 2 Vintage Air in 1st gen
I am considering doing a Vintage Air install on my 68. My stock heater/defroster leaves a lot to be desired, and the heater hoses aren't in a very good location. Plus, A/C would be nice to have in the summer. I am interested in the gen 2 unit with the electric controls & stepper motors. What is involved in installing one of these systems? I know DSE makes a bracket to mount the evaporator as well as a plate to mount the control panel in the stock dash area. What about the firewall? Does the firewall plate/bulkhead that VA supplies in their "sure-fit" kits work with the gen 2 evaporator? I'm trying to do this without too much fab work. You would think Vintage Air would be selling a complete gen 2 kit for the 67-69's by now. If anyone has installed one of these I'd be more than happy to hear the details. Pics would also be nice
Andy
-
Reply With Quote
