Results 1 to 2 of 2
Thread: Brake help
-
10-10-2006 #1
Registered User
- Join Date
- Feb 2006
- Location
- s.f. east bay california
- Posts
- 209
Brake help
I recently put two piston calipers on my truck in place of the stock single piston calipers. The company did not say anything about up grading the master cylinder. Do I need to. I ask because I have bled the brake systems several times since doing the swap and they start to loose there firmness after very little driving. They don't get progressavly worse they just kind of get soft and stay there. My friend says that it is possibly the master cylinder leaking between the two reseviors. Is ther some way to test this. I want to upgrade the brake system but I am not ready to do so and would hate to have to buy a stock type master cylinder now just to replace it again in the future.
Please help. I have to drive the truck the way it is for now and would hate to have something fail if it is broken and don't know it.
Dog will Hunt
-
10-16-2006 #2
Registered User
- Join Date
- Feb 2006
- Location
- s.f. east bay california
- Posts
- 209
Come on guys. I know you have the knowledge, share a little my way please. My truck will thank you for it.
Dog will Hunt
Reply With Quote
