3-3/8" gauge angle rings?

[Blown353]

As the title states, anyone have a source for angle rings for mounting 3-3/8" gauges? I see auto meter sells angle rings for 2-1/16" gauges, looking for something similar in the larger size....

http://store.summitracing.com/partde...5&autoview=sku

Worst case I'll make my own but hoping I can find something off the shelf.

[HILROD]

They also have 2 5/8, but I've never seen 3 3/8. FRANK

[Patrick]

I ran into the same problem with my Jeep. I could not find angled bezels for a 3 3/8 gauge.. so I made them. I used a piece of 3.5 pipe cut to desired angle and welded it up. If you are working with plastic, I am sure you could do the same with PVC or some sort of plastic tubing.

[Blown353]

I ran into the same problem with my Jeep. I could not find angled bezels for a 3 3/8 gauge.. so I made them. I used a piece of 3.5 pipe cut to desired angle and welded it up. If you are working with plastic, I am sure you could do the same with PVC or some sort of plastic tubing.

Thanks for the pics Patrick. That's my plan, only I'll probably be using plastic tube. I'm building a custom face for my dash out of 1/8" textured ABS plastic because the texture is nearly a perfect match for the original dash material.