Hotchkis TVS

[68ls1wannabe]

I'm finally ready to buy for my 68 camaro. The hotchkis kit seems to be exactly what I need. I'm building the car for the street and dragstrip so it will never see a road course. My only problem I that I don't like the 1.5 in drop rear springs. I want to use the dse 3 in drop. Just like the way it sits. I know I'll have to cut the fronts to get the right stance but that's ok. I also won't need the rear sway bar. Anybody know if they will break a kit like this up? Also if anyone is upgrading I'd be interested in a used setup like this cause I'm kinda on a budget. Going with the pst front bushings to. Just don't know about the solid one's for a street car. Am I going the right way with this or just asking for problems later on?

[rocketrod]

Yes you can buy the pieces individually, which is good since you really don't need the rear sway bar. As for the 1.5" drop rear leaf. You can always add a lowering block to drop the car.

Also Classic Industries has a 20% off sale and they sell the Hotchkis components your looking for.

[68ls1wannabe]

Well i've got credit card in hand. Done some searching for classic industries and found nothing. Does anyone have a phone # or website. I need this stuff yesterday and $ is burning a hole in my pocket.

[68BNUT]

http://www.classicindustries.com/


Try this site

[Hammered]

Go to Summit Racing, they have a store in the Atlanta area I believe. I bought all my Hotchkis stuff from them.