Results 1 to 4 of 4
Thread: 20" Big Uns
-
10-05-2006 #1
Registered User
- Join Date
- Oct 2006
- Posts
- 4
20" Big Uns
Greetings Gents! Starting a project. Wanting to go 18/20. I have been looking at tires and wheels for the rear. Needing to stay as close to 29" diameter as can. Looked at 295/40 but wanting something a little wider. I have found a 315/35. These need at least a 10.5 wheel I am told. The wheel manufactures I talked to only build wider than 20x10 on a custom (expensive!) basis. Anybody battled this situation before? Really wanting to go with a tire that is about 13 wide and this size would come close to filling the bill.
-
10-05-2006 #2
Registered User
- Join Date
- Jun 2006
- Location
- Indianapolis,IN
- Posts
- 1,605
Best your going to get is a 315/35/20 overall Diameter is 28.68
section 12.40
rim size 10.5-12.5
a 20x10 will work. Let use know if we can help you out on a set a wheels. We carry Coys / Budnik/ Billet Specialties. Along with some others Tim
10-05-2006 #3
Registered User
- Join Date
- Apr 2003
- Location
- chbg, pa
- Posts
- 1,157
wouldnt a 345/25/20 work also ?
10-06-2006 #4
Registered User
- Join Date
- Jun 2006
- Location
- Indianapolis,IN
- Posts
- 1,605
Sure the 345/25/20 would work.But the section is alittle larger than he was asking for 13/ 345 has a section of 13.53 not really a big deal but overall diameter he needed as close to 29 as possible. overall on a 345 is only 26.79 alittle smaller than he would like.
Last edited by PRRC; 10-06-2006 at 01:46 PM.
Reply With Quote
