Results 1 to 6 of 6
Thread: Metal Shrinker/stretcher..
-
11-06-2004 #1
Starting The Transformation
- Join Date
- Aug 2004
- Location
- Alta Loma,SoCal
- Posts
- 396
Metal Shrinker/stretcher..
Anyone know where to find one for cheap? Lowest i've found was 199.00, but would like to find cheaper since it is a way limited use item.
Maybe someone has one i could borrow for a while?
Thanks.
Phil
1965 Buick Skylark
-
11-07-2004 #2
Registered User
- Join Date
- Apr 2004
- Location
- OKC, OK
- Posts
- 3,739
Have you tried Eastwood company?
MikeMike Redpath
Musclerodz & Customz
405-288-0189
pro-touring parts specialists
Musclerodz.com
facebook page
http://www.facebook.com/#!/pages/Mus...73054649402015
instagram
Musclerodz
11-07-2004 #3
Starting The Transformation
- Join Date
- Aug 2004
- Location
- Alta Loma,SoCal
- Posts
- 396
Yes, $250. A bit much for a extremely limited use tool.
Originally Posted by MuscleRodz
1965 Buick Skylark
11-09-2004 #4
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
Phil,
Give this guy a call.
WOODWARD FAB
John Jones
810-632-5419
[email protected]
I purchased a shrinker/stretcher from him this spring for around $70 bucks. I also bought an 8" plate shear and a 4" bending brake so he gave me a pretty good deal but the regular prices were good to begin with...
Let us know what you find out...
MarkMark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
11-09-2004 #5
Starting The Transformation
- Join Date
- Aug 2004
- Location
- Alta Loma,SoCal
- Posts
- 396
Do you have a picture and/or part number for it? i called and was quote 170.00, so curious what the difference was. Originally Posted by astroracer
Thanks.1965 Buick Skylark
11-10-2004 #6
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
Phil,
That 170.00 may have been the actual price on the shrinker/stretcher... I bought all three tools from him at a car show and he was dealing... Sorry about the confusion.
I can say all of the tools work very well for the money. The shrinker/stretcher does what it's supposed to do and 170 is about as good as you're going to find. The 8" plate shear works very nicely! I can trim a hair width sliver of material off a piece of 3/16th's plate with no roll over... I was amazed!
MarkMark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
Reply With Quote
