question for Mark Stielow

[ProdigyCustoms]

Jody owns it now, ask him. PM camcojb

[lt1chevelle]

Jody owns it now, ask him. PM camcojb

i did he gave me the spring number off the front but i can seem to find what spring it is. and he dose not know how much is was lowered in the back

chris

[jeffandre]

Ask Jody how far the fender lips/edges are from the ground, front and rear, which will give you an idea of how much you need to do to get the same ride height.

[lt1chevelle]

Ask Jody how far the fender lips/edges are from the ground, front and rear, which will give you an idea of how much you need to do to get the same ride height.

alredy did that i was just woundering the exact hight and what he used (ex:drop spindles and springs or just springs)

but thanks everyone for the help

[camcojb]

Ask Jody how far the fender lips/edges are from the ground, front and rear, which will give you an idea of how much you need to do to get the same ride height.

Gave him the heights, front spring numbers, and that Mark used a B-car spindle conversion. That with a small block/aluminum heads should get him the same up front.

On the rear I cannot see a part number on the springs, although Hotchkis may know.

Jody