The BAD AST Project - Faze II

[astroracer]

Haven't been doing much out in the shop the last few weeks, been busy with family stuff and being sick for three days. I got out there this morning though and dusted off (yea, really) the hydroboost unit. I pulled off the original Prop valve and designed a bracket for the new Wilwood Adjustable Unit. Made the bracket out of some scrap .090 aluminum and bolted on the APV.
Took the whole thing in to my local Car Quest and they dug out a couple of fittings for me. A 9/16-18 for the front line out of the booster and a 1/2-20 for the rear line. 4 bucks and I was on my way. The HB unit I am using is out of a '95 Astro Van and the front line was 1/4" so I was happy they had the 9/16-18 for a 3/16th's line.
I also did a lot of cleaning on the boost unit. Now that the bracket is built I will mask everything off and spray the booster with silver ceramic brake caliper paint.
I got pictures but didn't get them uploaded yet. Maybe tomorrow.
Mark