The BAD AST Project - Faze II

[astroracer]

I got the box mounted in the back of the van today. Spent about 4 hours playing with the Tig machine. I made up two little brackets that I welded to the top of the box and bolted the box to the tube structure for the rear enclosure.

There is another screw in the diagonal brace down low in the box to keep it from "flapping". It's good and solid here.

With the cover in place.

And an over all shot with the box and MDS in place.

Well, got a lot done. I am waiting for my snap bushings to get here from McMaster Carr. I need to drill out the wire pass throughs but want these on hand just to verify hole sizes.
I am planning to start working on the dash harness this week. Cutting the old cluster connectors out and making an adapter harness to adapt the Autometer gauges. Everything is all labeled, just need to do it.


Should be fun.
Mark