Results 1 to 5 of 5
Thread: Gear Vendors.
Threaded View
-
06-24-2006 #1
Registered User
- Join Date
- Dec 2004
- Location
- Crestview FL
- Posts
- 276
Gear Vendors.
I am seriously planning on buying a gear vendors unit for my car and I was wondering if anyone here has any real world expierence with them? I have a turbo 350 with a 3.55 gear. The sales man told me that because of the gear split and torque multiplication that people typically see a .5 sec quicker ET in the quarter. I was just wondering how much of this was BS and how much was true. I like the idea of an overdrive and the fact that I could run 4.11s and still turn a much lower RPM at cruise speeds. I also like the idea that I do not have to change the cross member for an overdrive. I also like the idea that it is a very basic bolt in and the unit is just about bullet proof. (rated for 1200 hp) I will shread the th 350 long before the GV unit. and th 350's are easy and cheap to rebuild. Also at $2300 the unit price is more bang for the buck then the t-56 swap or a 700-r or 200-r where there will be a need for a lock up converter.
-





Reply With Quote



