Results 1 to 5 of 5
Thread: Engine rebuild question!
-
10-22-2004 #1
Registered User
- Join Date
- Aug 2004
- Location
- GA
- Posts
- 26
Engine rebuild question!
How much should I expect to pay for engine assembly if I have all the parts and the machine work has already been done? I have been quoted anywhere from $1,000 to $1,500 for assembly. Am I just crazy or is that way too much?
Kevin
Canton, GA
1968 Camaro "Project Achilles"
-
10-22-2004 #2
Registered User
- Join Date
- Sep 2002
- Location
- San Jose, CA
- Posts
- 1,793
That is about right, espically if you have a stroker or are using a rev kit
1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD
But ask me about my 2004 STi Auto-x car...
Just call me Brett
-
10-23-2004 #3
Registered User
- Join Date
- Aug 2001
- Location
- Wilton, CA. (Sacramento)
- Posts
- 2,995
It takes me about 40 hours to assemble an engine, sometimes longer. That includes measuring all clearances, degreeing the cam, file-fitting the rings, valve train geometry, etc. You can throw one together in a day, but if you want to verify all the critical areas it takes quite a while.
Jody
-
10-24-2004 #4
Registered User
- Join Date
- Sep 2001
- Location
- Accord, NY
- Posts
- 2,295
Good question. I was talking with my machinist yesterday and asked what I should figure on whn I have a motor built. I trust him based on past experience and he quoted me $1400 for machining and assembly.
69 Camaro convertible, 410, M22, 8-pt cage therapy program. SOLD.
68 camaro - SOLD
67 Bel Air - New street project with perfect floors, frame and trunk!
-
10-25-2004 #5
Registered User
- Join Date
- Aug 2004
- Location
- GA
- Posts
- 26
Thanks guys!
Kevin
Canton, GA
1968 Camaro "Project Achilles"
Reply With Quote
